Analysis of gas flow behavior in an annular fluidized-bed reactor for polystyrene waste treatment

The characteristics of bubble properties and the chaotic flow behavior of gas were investigated in an annular fluidized bed (0.102 m in inner diameter and 2 m in height) because the behavior of gas flow in such a reactor is one of the important factors governing reactor operation, reactor performance, and the reaction itself. Pressure fluctuations as a state variable for the analysis of gas flow behavior were measured and analyzed. Bubble properties were determined by adopting the cross-correlation function of pressure fluctuations. The resultant chaotic flow behavior of gas was interpreted by means of chaotic parameters such as the Kolmogorov entropy. It was found that the Kolmogorov entropy could be utilized effectively to explain the nonlinear dynamic behavior of gas-solid flow in the annular fluidized bed. The pierced length and rising velocity of bubbles increased with increasing gas velocity, bed temperature, and particle size of the bed material. The bubble frequency increased with increasing gas velocity and bed temperature, while it decreased with increasing particle size of the bed material. Correlations to predict the bubble properties in annular fluidized-bed reactors were suggested.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

模拟生物反应器加速产甲烷过程研究

渗滤液原液回灌易导致填埋垃圾产甲烷过程的滞后,从而对甲烷收集利用产生不利影响。通过3根实验室模拟生物反应器,研究了原液回灌(C1)、渗滤液好氧预处理后回灌(C2)和原液回灌+垃圾层上部通风曝气(C3)3种填埋方式下的填埋气产气规律。结果表明,C1甲烷浓度经历短暂上升,达到19.5%后开始逐渐降低,产甲烷速率和产甲烷总量均很低;C2甲烷浓度逐渐上升,在第121天时甲烷浓度达到50%,产甲烷最高速率和产甲烷总量分别为0.31 L/(kg·d)和25.2 L/kg。在停止上部垃圾层通风曝气后,C3甲烷浓度迅速上升,在81 d时甲烷浓度便达到50%以上,最大产甲烷速率和产甲烷总量分别为0.22 L/(kg·d)和16.0 L/kg。对各模拟柱填埋气可回收性评价结果表明,C3填埋气可回收利用比例最高,C2略低,C1在实验期间内则无可回收利用气体产生。     

Influence of HCl on oxidation of gaseous elemental mercury by dielectric barrier discharge process

The influence of HCl on the oxidation of gaseous elemental mercury (Hg0) has been investigated using a dielectric barrier discharge (DBD) plasma process, where the temperature of the plasma reactor and the composition of gas mixtures of HCl, H2O, NO, and O2 in N2 balance have been varied. We observe that Cl atoms and Cl2 molecules, created by the DBD process, play important roles in the oxidation of Hg0 to HgCl2. The addition of H2O to the gas mixture of HCl in N2 accelerates the oxidation of Hg0, although no appreciable effect of H2O alone on the oxidation of Hg0 has been observed. The increase of the reaction temperature in the presence of HCl results in the reduction of Hg0 oxidation efficiency probably due to the deterioration of the heterogeneous chemical reaction of Hg0 with chlorinated species on the reactor wall. The presence of NO shows an inhibitory effect on the oxidation of Hg0 under DBD of 16% O2 in N2, indicating that NO acts as an O and O3 scavenger. At the composition of Hg0 (280 microg m(-3)), HCl (25 ppm), NO (204 ppm), O2 (16%) and N2 (balance) and temperature 90 degrees C, we obtain the nearly complete oxidation of Hg0 at a specific energy density of 8 J l(-1). These results lead us to suggest that the DBD process can be viable for the treatment of mercury released from coal-fired power plants.     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.     

Root uptake of atenolol,sulfamethoxazole and carbamazepine,and their transformation in three soils and four plants

Soils can be contaminated by pharmaceuticals. The aim of this study was to evaluate the impact of soil conditions (influencing sorption and persistence of pharmaceuticals in soils) and plant type on the root uptake of selected pharmaceuticals and their transformation in plant-soil systems. Four plants (lamb’s lettuce, spinach, arugula, radish) planted in 3 soils were irrigated for 20 days (26) with water contaminated by one of 3 pharmaceuticals (carbamazepine, atenolol, sulfamethoxazole) or their mixture. The concentrations of pharmaceuticals and their metabolites in soils and plant tissues were evaluated after the harvest. Sulfamethoxazole and atenolol dissipated rapidly from soils. The larger concentrations of both compounds and an atenolol metabolite were found in roots than in leaves. Sulfamethoxazole metabolites were below the limits of quantifications. Carbamazepine was stable in soils, easily uptaken, accumulated, and metabolized in plant leaves. The efficiency of radish and arugula (both family Brassicaceae) in metabolizing was very low contrary to the high and moderate efficiencies of lamb’s lettuce and spinach, respectively. Compounds’ transformations mostly masked the soil impact on their accumulation in plant tissues. The negative relationships were found between the carbamazepine sorption coefficients and its concentrations in roots of radish, lamb’s lettuce, and spinach.

     

Microwave Plasma Conversion of Volatile Organic Compounds

Abstract

A microwave-induced, steam/Ar/O₂ , plasma “torch” was operated at atmospheric pressure to determine the feasibility of destroying volatile organic compounds (VOCs) of concern. The plasma process can be coupled with adsorbent technology by providing steam as the fluid carrier for desorbing the VOCs from an adsorbent. Hence, N₂ can be excluded by using a relatively inexpensive carrier gas, and thermal formation of oxides of nitrogen (NO_x ) is avoided in the plasma.

The objectives of the study were to evaluate the technical feasibility of destroying VOCs from gas streams by using a commercially available microwave plasma torch and to examine whether significant byproducts were produced. Trichloroethene (TCE) and toluene (TOL) were added as representative VOCs of interest to a flow that contained Ar as a carrier gas in addition to O₂ and steam.The O₂ was necessary to ensure that undesirable byproducts were not formed in the process. Microwave power applied at 500–600 W was found to be sufficient to achieve the destruction of the test compounds, down to the detection limits of the gas chromatograph that was used in the analysis. Samples of the postmicrowave gases were collected on sorbent tubes for the analysis of dioxins and other byproducts. No hazardous byproducts were detected when sufficient O₂ was added to the flow. The destruction efficiency at a fixed microwave power improved with the addition of steam to the flow that passed through the torch.     

Carbonaceous resin capsule for vapor-phase monitoring of volatile hydrocarbons in soil: partitioning and kinetic model verification

The resin capsule system (RCS) was tested as a means of providing data on the presence and forms of volatile hydrocarbons. Results indicated that resin capsules provided data showing sensitivity to soil variables (texture and moisture content) and time. The objectives of this paper are to evaluate the RCS methodology and to determine whether carbonaceous resin capsules provide results that can be described by fundamental chemical partitioning and kinetic principles. Findings revealed a significant relationship between quantities of benzene, toluene, ethylbenzene, and xylene adsorbed on the capsule and quantities partitioned into the vapor phase. Kinetic evaluation indicated that the vapor adsorption by the resin capsule is regulated by diffusion processes. No verification of rate-limiting processes was possible due to limitations imposed by the experimental design, but it appears that during early stages, adsorption rate was limited by vapor diffusion through the soil. The resin capsule data also reflected differences that would be expected due to properties of the organic liquids present. These results provide further evidence that the RCS could be developed to suggest direct in situ monitoring to reveal quantities and nature of organic substances in soils.     

Contamination of polychlorinated biphenyls and organochlorine pesticides in breast milk in Korea: Time-course variation,influencing factors,and exposure assessment

Breast milk is a noninvasive specimen to assess maternal and infant exposure to polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). In this study, 206 breast milk samples were collected from 87 participants during lactation, at <7, 15, 30, or 90 days postpartum in four cities in Korea. The total concentrations of PCBs (ΣPCB) and OCPs (ΣOCP) ranged from <LOQ to 84.0 (median: 12.1) ng g⁻¹ lipid weight and from <LOQ to 559 (median: 144) ng g⁻¹ lipid weight, respectively. The residue levels of these contaminants measured in our study were relatively lower than those reported for European, African and Asian populations. Within a month postpartum typically after day seven the levels of ΣPCB and ΣOCP significantly increased. Some OCP compounds were correlated with maternal age, BMI, parity, and delivery mode. Certain types of dietary habits such as seafood and noodle consumption were significantly associated with ΣPCB and ΣOCP. The estimated daily intakes (EDIs) of ΣPCB and ΣOCP were 45.2–127 ng kg⁻¹ bw day⁻¹ and 625–1259 ng kg⁻¹ bw day⁻¹ during lactation, respectively, which are lower than the threshold values proposed by the US EPA and Health Canada. The exposure of Korean infants to chlordanes via breast milk had a potential health risk which deserves further investigation.